SRC200AB - Swivel Spherical Aluminum Cap 200 mm with Base
SRC200AB - Swivel Spherical Aluminum Cap 200 mm with Base
- Rotary chimney cowls used on ventilation chimney ducts. Support chimney draught by creating negative pressure in the ventilation duct and preventing back draught.
- Diameter: 200 mm
- Material: Aluminum
Benefits
- improve chimney draft, by creating negative pressure in the ventilation duct
- preventing back draught
- protecting the chimney flue from precipitation
MEMBERSHIP
The rotary ball cap is mounted on top of the chimney using a base or directly on the pipe - chimney liner. In both cases, the cowl should be located under the peak of the roof. Make sure that the cowl is not covered on either side by a wall or other flue pipe. If the distance between the flue pipes is small, it is recommended to install longitudinal rotary cowls.Mounting the cowl through the base
Mark the location of the holes for the mounting pins on the top of the chimney, drill the holes and place the pins in them. Then screw on the base of the rotary cowl, gluing the attached gaskets in advance. If necessary, the top of the chimney can be leveled with sealing compound beforehand. After making sure that the entire structure is stable, put on the cowl and tighten it to the base with the side nuts . Properly installed, the cowl should rotate freely without making any sound.Mounting the cowl directly on the pipe - chimney liner
It should be fixed with the help of side nuts, after first cutting longitudinal holes in the pipe.NOTE: It is worth remembering that in any case, to ensure safety, the installation of cowls should be entrusted to specialized professionals!
Maintenance
Rotary cowls, like all technical devices, require maintenance. The inspection is best performed once a year. It is worth combining it with the annual inspection of chimney and ventilation ducts performed by chimney sweeping companies. To perform the inspection, the top (rotary) part of the cowl should be removed, by unscrewing the side nuts. Easy access to the flue will allow you to inspect it, and the disassembled cowl can be cleaned ( detergent + running water). After drying and removing defects, if any, put the cowl back on the base and carefully tighten the side nuts.WARRANTY
The warranty period is 2 years from the date of purchase. We Warranty the high quality of the products we offer, and hope for your satisfaction with long, trouble-free operation. If you have any questions, we will provide you with professional advice and assistance.Ask a question
Write your opinion